PTFE Lined Instrument Tee
Products Description
- Elite manufactures lined pipe and fittings by use compression molding, isostatic molding, injection molding, transfer molding, hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:
- Working temperature is high at the range of -29oC-200oC; except the molten alkali metals, element fluorine and aromatic hydrocarbon, lined products can be used in any chemical medium.
- Vacuum resistance. In the range of -29oC-150oC, it is applicable for vacuum condition. In chemical production, the vacuum condition occurs due to cooling, longitudinal emissions, or medium backflow.
- High-pressure resistance. Within temperature working condition,
it can sustain the working pressure of 3.0MPa. - Resistance to penetration. Adapt the high-quality PTFE, to make it
of high density and enough thickness after advanced lining processing,
make it excellent anti-osmosis. - PTFE advanced lining molding process achieved the status of
synchronous hot expansion or cold shrinkage for steel components
and fluorine plastic. - Elite adopts the standard size according to
HG, GB, DIN, ANSI, and JIS etc., which improves
interchangeability, to provide convenience for installation. - Specific gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.
- Tensile rate: 20.7Mpa minimum as per ASTM D 638 test standard
- Elongation rate: 250% minimum as per ASTM D 638 test standard.
- Manufacture standard: ASTM D 4895. Operating in vacuum
condition within 150oC.
| Attribute | Description |
|---|
| Pipe Material | ASTM A106 |
| Lining Material | PTFE, PO, PE, PP |
| Flange Material | SS304, SS304L, SS316, SS316L, ASTM A3 |
| Nominal Diameter | NPS 1-24 |
| Pressure Range | 150lb, 300lb, JIS 10k, DIS |
| Connection Type | Flange Connection |
Material: Carbon Steel
Standards: Hg/T2437
Size: Dn25~600
Model: Eccentric Reducer
Transport Package: Plywood
Type: Eccentric
Technics: Casting
Customized: Customized
Materials: Smls+PTFE
Specification: CE, SGS, TS